As outside wall treatment alternatives sandstone and brick are more powerful and all attractive compared to other ordinary siding materials. Brick and stone walls will last longer than most other elements of your house, and the two materials are utilized in the construction of houses. But among these is more than the other, both materials are also expensive.
The Materials
Sandstone is a naturally occurring stone comprising good grains of minerals such as quartz or feldspar stored together in a matrix of calcite or other minerals. Common sandstone colors are at the part of the colour spectrum, but sandstone may be white, green or other colors depending on its mineral content. Brick is a fabricated material can also be available in a range of colors, and made from clay.
Installation
Sandstone and brick are typically installed within an exterior veneer over construction. Brick is laid contrary to the sheathing in classes held together by mortar, with a fabric set between the brick veneer and the sheathing. Installation of veneer is more complicated. Felt or heavy building paper covers the sheathing, and there is a metal lath put over the newspaper. The installer applies a textured mortar scrape coating over the lath, followed closely by a mortar bed into the rock is set. Joints between the pieces of rock are filled with mortar.
Durability
Both brick and sandstone are difficult, durable materials which can outlast house siding materials, presuming they’re properly maintained and not always exposed to extreme conditions. Should you maintain the integrity of the siding and repair mortar joints as needed, you can anticipate either material to last for decades. However, is relatively soft compared to other kinds of rock, and over a time period, it will erode under the effects of weather. Finally, it may chip or crack.
Cost
Neither brick nor sandstone is an siding option. Both materials generally be more expensive than aluminum, wood or vinyl siding. Brick should cost between $6 and $12 per square foot, compared to 2 to $3 per square foot for vinyl, and $3 to $5 per square foot for aluminum. Sandstone is a whole lot more expensive even than brick; it could operate between $15 and $30 per square foot.