You may be wondering why bathroom tiling has become so popular recently. When you see high-quality tiles in person, you’ll quickly realize how beautiful they are and why so many homeowners are choosing to tile their bathrooms. In this article, we will give you all the reasons why you should tile your bathroom floor and how to do your own installation! This way, you’ll be able to transform your bathroom and make it more luxurious and modern. Update the flooring Huntsville AL for a new look.
Important Advantages
Bathroom tile installation quickly brings clear and immediate advantages:
– Bathroom tiles are very easy to replace.
– It’s an inexpensive DIY project compared to other home improvement solutions out there.
– Can be done easily and over existing surfaces including plain concrete and old ceramics.
Useful Advice
1- If you will be using natural stone tiles and you want the stones’ color to be enhanced, you can do so by using a stone color enhancer. It will give you a matte or glossy finish, depending on your preferences.The application of the color enhancer will be prior the application of the sealant.
2- For stone tiles, laminate them prior to the installation to protect them from detergents, dirt, and liquids. Laminating the tiles will also ensure the materials’ durability.
3- When installing the hardwood flooring Huntsville AL, make sure your bathroom floors are clean, free of contaminants, and dry.
How To Install Bathroom Tiles On Your Own
The tools and materials that you will need for the installation are the following:
– Grout
– Speed square
– Thin-set mortar
– Grout sealant
– Wax pencil
– flooring contractor Huntsville AL spacers
– Wet tile saw
– Measuring tape
– Sandpaper
– Notched trowel
– Safety glasses
– Sponge
– Soft cloth
– Grout float
Directions:
– Buy enough tiles to cover the entire area of your bathroom floor. Also, take into account all the half pieces, replacement tiles, and scrap pieces. We would recommend that you purchase all the tiles at once as different stocks tend to look different.
– Set your tiles on the surface so you can grid out the area. Begin at the center of your bathroom floor. If you will be setting a pattern, the dry fit process would deem essential. The patterns should end consistently at the edges.
– Trace around your center tile once you’re happy with the placement. Then, determine the cuts that will be needed. Leave your marks on the tiles and on the floor.
– Mix your thin-set mortar until it has the consistency similar to peanut butter. You can also use other adhesives that have been recommended by the manufacturer of the tiles that you have purchased. Spread the adhesive or thinset using your notched trowel on the floor. Start at the surface’s center and hold your trowel at an angle of 45 degrees.
– Now, set your tiles one after the other. Twist or wiggle each tile to make sure that it has a strong bond to the adhesive.
– Use your wet-cut tile saw when making your cuts.
– Allow your tiles to cure overnight. If you want to be safe, leave them for 48 hours.
– The last step is to finish your floor with grout, and you’re done!